AUTOMATIC MICRO-COMPUTERIZED FLEXOGRAPHY PROCESSOR |
Exposure、Drying、Light Finishing、Automatic Plate Washing、Cleansing Liquid Cleaning、Pre-drying
|
| |
|
| Exposure Machine + Light Finisher + Dryer |
| Equipped with forced vacuum machine and latest air suction method, guaranteed to complete adsorption |
| with 3 – 10 seconds. |
| Latest fault feedback LED indication electronic ballast, UV tube is equipped with external fault sensor for |
| safety and reduces loss. |
| Using the most sophisticated high power UV tube to facilitate quick and uniform exposure and exquisite |
| plate making. |
| Build with UVA tube and special UVC tube, exposure processing and post-exposure is done in one time. |
After processing the plate printing can be stable, eliminates viscosity on the plate surface, increases the
|
| printing durability of |
| plate, drying oven, 3-layer racks, insulation design, safe, and power saving. |
| This equipment can be located under the pre-drying machine to save space. |
| |
| Automatic Link Flexible Plate Washer |
| Air-tight design, waste gas is emitted outdoor, very environmental concept. |
| After punching holes on the exposed plates and hang on the special conducting plate, it is ready for |
| plate washing. |
| Automatic circulating solution, solution concentration is digitalize controlled for free setup any time. |
| Not dripping type, therefore it absolutely not cause any clogging and breakdown problem. |
| In the course of plate washing, it is brushed backward lying flat and rotary brushed, the wash-out plates |
| are very neat. |
| Pumping clean solutions to rinse the washed plate is fully automatic controlled, intermittent pumping upon |
| arrival of plates. |
| In order to avoid wasting, pumping quantity can be adjusted freely, pumping stops immediately when the |
| plates passed. |
| Plates are rinsed with clean solution to save the time for wiping the surface. |
| Before finishing, it also passes preliminary drying, absolutely won’t dirty your hand. |
| Able to make automatic continuous plate feeding during the whole process of plate washing, mass production. |
| 8 sets of memory for thick and thin plate adjustment, by pressing a key, the thickness and washing |
| speed can be adjusted coordinately. |
| There are 15-section speeds to coordinate plate-washing speed with thickness, by pressing a key, washing |
| speed can be adjusted during machine running. |
| High-tech man-machine interface touch screen for easy operation and job data display. |
| Able to make first class of printing plate with various brands of flexible plate material.It is applicable to |
| the printing of carton, paper box, label, tape, soft package, paper bag, shopping bag, knitting bag, etc. |
| specially theplate-making for high quality color flexible printing and mass production. |
| |
Exposure Machine + Light Finisher + Dryer |
SPECIFICATIONS |
GT-900 |
GT- 660 |
GT- 460 |
Effective Area |
900 × 1300 mm |
660 × 920 mm |
460 × 660 mm |
Voltage Used |
AC 220V 50/60 Hz |
Power Consumption |
8.0 KW |
7.0 KW |
5.5 KW |
Machine Size |
168×125×85 cm |
146×106×82 cm |
110×92×82 cm |
Machine Weight |
350 kg |
280 kg |
195 kg |
Automatic Plate Washing Machine |
Effective Area |
900 × 1300 mm |
660 × 920 mm |
460 × 660 mm |
Voltage Used |
AC 220V 50/60 Hz |
|
Power Consumption |
7.5 KW |
5.0 KW |
4.5 KW |
Machine Size |
150×362×145 cm |
332×116×145 cm |
275x92×145 cm |
Machine Weight |
400 kg |
320 kg |
250 kg |
|
| |
ROTARY & FLAT EXPOSURE PROCESSOR |
| This Rotary & Flat Exposure Processor is designed for making polymer plate, relief plate and flexography. |
| It is suitable for cylinder type & flat type printing machine, such as label printing, cylinder type trademark printing |
| or computer form printing. The cylinder used in the processor is same size as if used in the printing machine. |
| Put the negative film on the polymer plate and circle around the cylinder, then the negative is sucked firmly by the |
| strong vacuum machine and carry out exposure, this can solve the single-way lengthening issue during printing. |
| |
| |
 |
Model |
GT-P-RA2 |
Max. Plate Width： |
420 mm. (16.5") |
Cylinder Circumference： |
610 mm. (24") – 200 mm (8”) |
Max. Flat Exposure： |
440 mm × 620 mm |
Machine Size (mm)： |
W 900 x Depth 500 x H 1200 |
Machine Net Weight： |
100 Kg |
Total Power Required： |
1.5 KW |
Exposure： |
UV-A lamp (40 W × 24 pc) |
Standard Accessory： |
one cylinder based on the size required |
|
|
| |
| |
| Relatively big rotary exposure processor, suits for partly glazing, paper box printing etc. |
| Using the former-size negative to expose, the single-way lengthening issue can be solved effectively. |
| |
 |
MODEL |
GT-RA0 |
GT-R3040 |
Effective Area |
1300 × 840 mm |
1016×762 mm |
Voltage Used |
AC220V 50/60 Hz |
Power Consumption |
2.0 KW |
1.8 KW |
Machine Size |
185×85×125 cm |
155×85×125 cm |
Machine Weight |
180 kg |
145 kg |
|
|
| |
| Flexography Letterpress Plate-making Machine |
| Exposure＋ Washing＋ Drying 3-In-1 Floor Type |
| All functions are compactly packaged into one suit of machine |
| with a minimum of space requirement. |
| All controls are located in the front of the machine. |
| A drawer type exposure device is easy to load and unload |
| negatives and block plates. |
| For uniform light exposure throughout a sufficient number of |
| lighting tubes are furnished. |
| Wash-out of the exposed plate is performed in the liquid tank wherein |
| brushes and moving plate holder are arranged. |
| wherein brushes and moving plate holder are arranged |
| For speedy and uniform drying of the developed plate a hot |
| air blowing type drying oven is also equipped. |
| Applicable to any cleaning materials of any brand |
| of solvent, water and alcohol. |
|
|
|
MODEL |
GT-FA2 |
GT-FB3 |
GT-FA3 |
GT-FA4 |
Effective Area |
62×44 cm |
50×37 cm |
30x42 cm |
21x30 cm |
Power Consumption |
3.0 KW |
2.5 KW |
2.5 KW |
1.8 KW |
Machine Size |
96×76×102 cm |
85×56×102 cm |
68×58×91 cm |
57×50×91 cm |
Machine Weight |
125 kg |
110 kg |
95 kg |
80 kg |
|
| |
| |
| Professional type Resin/Soft resin plate-making machine. |
| Exposure/Plate-wash-out Independent type, easy for mass plate-making. |
| |
| Exposing Machine |
| Strong absorption vacuum machine with noise-free effect, |
| super-strong UV tube provide most steady wave. |
|
 |
|
MODEL |
GT-PA0 |
GT-PA1 |
GT-PA2 |
GT-PB3 |
Effective Area |
130×84 cm |
60 x 84 cm |
62×44 cm |
50×37 cm |
Power Consumption |
1.8 KW |
1.5 KW |
1.2 KW |
0.8 KW |
Machine Size |
155×100×45 cm |
125×78×38 cm |
76×77×38 cm |
70×64×38 cm |
Machine Weight |
110 kg |
75 kg |
52 kg |
45 kg |
|
| |
| Plate-Wash-out-Drying |
| Made of stainless steel, safe to clean with water, |
| alcohol and solvent. |
| Plate-Cleaning + Drying complete piece device. |
| Easy operation and require minimal space. |
|
|
|
MODEL |
GT-PA0 |
GT-PA1 |
GT-PA2 |
GT-PB3 |
Effective Area |
130 × 84 cm |
60 x 84 cm |
62 × 44 cm |
50 × 37 cm |
Power Consumption |
3.5 KW |
3.0 KW |
2.5 KW |
1.5 KW |
Machine Size |
150×100×92 cm |
106×77×92 cm |
79x91×92 cm |
68x76×92 cm |
Machine Weight |
220 kg |
135 kg |
110 kg |
75 kg |
|
| |
| Light Finisher |
| Able to be placed under the exposure machine to |
| save space. |
| To get ride of the viscosity of the plate's face after the |
| plate is processed by this machine. |
| Light Finisher is to extend the plate's life. |
|
 |
|
MODEL |
A0 |
A1 |
A2 |
A3 |
Effective Area |
130×84 cm |
60×84cm |
62×44cm |
50×37 cm |
Machine Size |
150×100×32 cm |
125×96×32 cm |
76×85×32cm |
64×76×32 cm |
Machine Weight |
80 kg |
60 kg |
45 kg |
40 kg |
|
|
|
|
